In the below output I have setup an Equallogic using the serial port and putty. Note in this instance I have added the array to an existing group. I also manually set the address of the management interface.
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2012.08.02 10:10:07 =~=~=~=~=~=~=~=~=~=~=~=
Enter the network configuration for the array.
Member name []: BJ-HQ-EQ3
Network interface [eth0]:
IP address for network interface []: 192.168.100.13
Netmask [255.255.255.0]:
Default gateway [192.168.100.1]:
Initializing interface eth0. This may take a minute…..
Enter the IP address and name of the group that the array will join.
Group name []: BJ-HQ-EQGROUP
Group IP address [192.168.100.10]:
Searching to see if the group exists. This may take a few minutes.
Password for managing group membership:
Do you want to add this array to group BJ-HQ-EQGROUP (yes | no ) [yes]:
Synchronizing configuration data with the group. This may take
several minutes.—-
Saving the configuration…
Waiting for configuration to become active…Done
2821:24:psgd: 2-Aug-2012 09:08:34.510025:psgd_group.cc:17393:INFO::18.2.0:Group member BJ-HQ-EQ3 now active in the group.
The array has successfully become a member of group BJ-HQ-EQGROUP.
You must now configure the RAID set using the Group manager GUI or CLI.
Configuration of the RAID set requires that the raid-level be selected.
2855:32:psgd: 2-Aug-2012 09:08:34.710033:psgd_group.cc:17393:INFO::18.2.0:Group member BJ-HQ-EQ2 now active in the group.
2862:34:psgd: 2-Aug-2012 09:08:34.760035:psgd_group.cc:17393:INFO::18.2.0:Group member BJ-HQ-EQ1 now active in the group.
BJ-HQ-EQGROUP> member select HQ- J-HQ-EQ3
BJ-HQ-EQGROUP(member_BJ-HQ-EQ3)> eth select 1 ipaddress 172.20.1.212 netmask 255
.255.0.0
BJ-HQ-EQGROUP(member_BJ-HQ-EQ3)> eth select 1 up
This port is for group management only. Make sure it is connected to a dedicated management network.
Do you want to enable the management interface? (y/n) [n]y
BJ-HQ-EQGROUP(member_BJ-HQ-EQ3)> sh eth
Name ifType ifSpeed Mtu Ipaddress Status Errors
DCB
—- ————— ———- —- —————————– —— ——
——
eth0 ethernet-csmacd 10 Gbps 9000 192.168.100.13 up 0
off
eth1 ethernet-csmacd 100 Mbps 1500 172.20.1.212 up 0
off
BJ-HQ-EQGROUP(member_BJ-HQ-EQ3)>
